What are the handling and storage requirements for ferrule fittings?

The ferrule joint is to compress the ferrule by thread interlocking, and the ferrule deforms the tube uniformly to achieve the sealing effect. So what are the handling and storage requirements for ferrule joints?

The handling and storage requirements for ferrule joints are described as follows:
1. The support and anti-rotation of the ferrule joint should be appropriate. Generally, the diameter of the rod should be 2mm smaller than the anti-rotation hole, so as not to affect the free adjustment and compensation of the rotary joint.
2. Install the machine concentrically as much as possible to ensure the good operation of the rotary joint.
3. When installing the threaded ferrule joint, pay attention to whether the thread direction of the inner and outer pipes corresponds to the rotation direction of the drum, and the thread rotation direction of the inner and outer pipes should also be the same.
4. The connection between the ferrule joint and the pipeline must be connected by a hose, and rigid connection is prohibited.
5. The inlet and outlet of the ferrule joint should be directly connected with the hose as much as possible.
6. In the assembly of the inner tube of the ferrule joint, pay attention to the matching of the size and the auxiliary support of the weight.
6. The ferrule joints should avoid impact and fall during handling and storage, so as not to damage the interface and internal parts.

The ferrule joint is to compress the ferrule by thread interlocking, and the ferrule deforms the tube uniformly to achieve the sealing effect. The handling and storage requirements of ferrule joints are mainly described above. We should all understand the handling and storage requirements of our ferrule joints.

佛山市玖州自控技术有限公司

电话：0757-86680382 13929954058 汪先生
传真：0757-86680381
邮箱：chenglin.wang@joecontrol.com
地址：佛山市南海区桃园东路88号慧泉科技产业中心第三栋5楼

关注微信公众号

网站建设：中企动力佛山

SEO